3rd-Party Billing
Shopping Cart
|
|
|
|
 |
 |
| The Quickie® Ti Titanium is the latest
addition to our family of ultra-lightweight rigid
chairs. Using lightweight titanium tubing, a minimalist
design, and several patented features, our engineers
have succeeded in developing the perfect balance between
form and function. With a chair weight averaging between
15 and 17 lbs., the Quickie Ti Titanium is the best
choice for today's active user. |
|
|
|
|
 |
|
|
|
|
The Titanium
Advantage
Titanium alloy is approximately 3 times stronger
than aluminum. This advantage in strength makes
it possible to build a lighter, simpler frame.
Titanium tubing also provides a more controlled
rebound and superior torque strength. With an
average weight of 16.9 lbs, the Quickie® Ti
Titanium is Sunrise Medical's premium
rigid-chair choice. |
| |
|
|
|
|
|
Patent-Pending Caster Pivot-Adjuster
To reduce excess weight and flutter, our
engineers have eliminated the caster housing so
that the caster fork now threads directly into
the frame. A special pivot caster-adjuster
allows the forks to pivot 16° in 2° increments.
This feature enables the user to adjust the seat
"slope" between 2.5 - 9cm (1" - 3.5") while
maintaining a perpendicular caster-wheel/ground
alignment.
|
| |
|
|
|
|
|
Custom
Tailored Frame Options
To ensure the best possible fit, our engineers
have developed over 4,000 different frame
configurations. Each frame can be customized in
six different ways: frame angle (70°, 80°, 85°),
frame inset (2.5cm/1", 5cm/2", 7.5cm/3"), front
seat-height (40.5 - 51cm/16 - 20" in 1.3cm/½"
increments), rear seat-height (35.5 - 48cm/14 -
19" in 1.3cm/½" increments), seat width (33 -
46cm/13 - 18"), and seat depth (35.5 - 48cm/14 -
19"). |
| |
|
|
|
|
|
Easy-To-Load
Design
A fold-down back, "L" shaped frame and extremely
low frame-weight make vehicle transfers about as
easy as loading a briefcase. |
| |
|
|
|
|
|
 |
|
|
 |
The new Quickie® Ti
Titanium chair is distinctly different from the
Quickie (GPV) Ti Titanium. Its new mono-tube
construction and reduced weight create a fresh
concept in titanium chair design. The Quickie (GPV)
Ti Titanium chair is now referred to as the
"Quickie® GPV Titanium". |
|
|
|
|
The rear axle
features 4" of center-of-gravity adjustment in
1/2" increments. When a chair is not properly
centered, it feels heavy, unresponsive, and
sometimes "tippy". By using a 4" adjustment
range that accommodates many different body
types, this problem can be avoided. |
|
|
|
|
The Quickie Ti
Titanium features new fold-down push handles.
Push handles sometimes act like fish hooks when
pulling a chair out of storage. In contrast,
fold-down push handles allow the chair to slide
out without hooking everything else. |
|
|
|
|
A special flat area
on the axle-sleeve nut corrects toe-in and
toe-out in three easy steps: Loosen the camber
tube. Place a square against the flat area on
the axle-sleeve nut and the ground. Re-tighten
the camber tube. The wheels are now aligned. |
|
|
|
|
The axle plate
features 3" vertical adjustment in 1/2"
increments. This provides plenty of space to
adjust wheel sizes, seat height and seat angle. |
|
|
|
|
The rear camber
tube is secured to the axle plate with a special
compression axle sleeve. The axle sleeve is held
together with Torx® head screws. This advanced
hardware is superior in design and holding
power. A special tool kit containing Torx
wrenches ships with the chair. |
|
|
|
|
|
 |
|
|
| Built to
meet the requirements of HCPCS code: |
K0005 |
| Product
Weight: |
Approx. 15 - 20
lbs. w/o footrests |
| Product
Width: |
13 in. - 18 in.
seat width |
| Product
Length/Depth: |
14 in. - 19 in.
seat depth |
| Product
Height: |
16 in. - 20 in.
seat to floor |
| Product
Weight Capacity: |
250 lbs. |
| Overall
Width |
19 in. - 31 in. |
| Caster
Options |
3 in., 4 in., 5 in. |
| Rear Wheel
Options |
24 in., 24 in. heat
treated, 26 in., 26 in. heat treated |
| Axle
Options |
Standard
stainless-steel, optional Titanium, and
quad-release axle nuts |
|
Download Order Form |
|
|
|
|
|
|
|
